Reviewed diagnostic family

Kenmore 110 VMAX washer F1 E1: main control fault

Sears identifies F1 E1 on reviewed Kenmore 110 VMAX washers as a main-control fault and documents a single power reset before service.

Model-family scope: Reviewed Kenmore 110 VMAX top-load series: 110.915122, 110.915111, and 110.915501. The interactive diagnostic requires a model number matching this reviewed family before it will use this path.
KenmoreWasherReviewed 2026-09-11

What this guide covers

Error codes: F1 E1

This guide follows a structured decision tree built from manufacturer troubleshooting information. It does not assume that the most commonly replaced part is the failed part, and it does not show an exact-fit replacement part unless model compatibility has been independently verified.

Continue this exact diagnostic

Safe troubleshooting sequence

This reviewed path begins with a direct owner-safe action or status check rather than a branching question. Follow the step below, then use the interactive diagnostic if the condition persists.

  1. Unplug the washer or switch its breaker off for about 5 minutesRestore power once; do not remove panels.
  2. Retry one normal cycleIf the same code returns, do not keep resetting it.

Reviewed outcomes

Perform the one documented power reset

Sears identifies F1 E1 on reviewed Kenmore 110 VMAX washers as a main-control fault and documents a single power reset before service.

Evidence strength: Strong

The code returned after the documented reset

The Sears guide points beyond the reset to an internal control, wiring, or component check.

Evidence strength: Strong

When professional diagnosis is the safer next step

The Sears guide points beyond the reset to an internal control, wiring, or component check.

Appliance Verdict stops before energized electrical testing, gas-system work, sealed-system work, and other checks that can create unnecessary risk. A technician can use the model, issue, and completed checks from the interactive diagnostic as a starting point.

Repair or replace?

A diagnosis and a repair decision are different questions. Once you have a real repair quote, compare the total repair cost with the all-in price of a comparable replacement. Warranty or protection-plan coverage, appliance age, reliability history, efficiency, and likely future repairs can all matter. Appliance Verdict’s interactive result includes a transparent cost comparison rather than a black-box replacement recommendation.

Manufacturer sources

Sears PartsDirect

Dataset reviewed through 2026-09-11. Appliance Verdict is independent and is not endorsed by the manufacturers cited. Always follow the exact owner or service documentation for your model.

Browse reviewed washer error codes →

Browse all Kenmore troubleshooting guides →

Related washer guides