Electrolux washer E11: long fill / not filling
Electrolux says E11 means the front-load washer is not filling during the wash phase. The reviewed checks cover supply-line orientation, household water supply, and recent installation before service.
What this guide covers
Error codes: E11, 11
This guide follows a structured decision tree built from manufacturer troubleshooting information. It does not assume that the most commonly replaced part is the failed part, and it does not show an exact-fit replacement part unless model compatibility has been independently verified.
Continue this exact diagnostic
Safe troubleshooting sequence
Start with the observations and external checks that can be verified without opening energized assemblies. The interactive version asks these in order and changes the path based on your answers.
- Verify hot/cold supply orientationElectrolux calls out reversed hot and cold lines as a known installation issue for E11.
- Check household water supplyE11 is a long-fill condition, so insufficient incoming water must be ruled out.
- Consider a recent installation or moveElectrolux specifically recommends installer verification when E11 follows installation or moving.
What the answers can lead to
Correct reversed hot/cold connections
Reversed supply lines match Electrolux’s documented E11 guidance.
Evidence strength: Strong
Restore the household water supply
A closed or inadequate supply can prevent the washer from filling.
Evidence strength: Strong
Have the installer verify the supply and installation
Recent-install problems should be corrected before internal parts are suspected.
Evidence strength: Strong
E11 persists after the external water-supply checks
The remaining fill/sensing/control possibilities require model-specific diagnosis.
Evidence strength: Strong
When professional diagnosis is the safer next step
Recent-install problems should be corrected before internal parts are suspected. The remaining fill/sensing/control possibilities require model-specific diagnosis.
Appliance Verdict stops before energized electrical testing, gas-system work, sealed-system work, and other checks that can create unnecessary risk. A technician can use the model, issue, and completed checks from the interactive diagnostic as a starting point.
Repair or replace?
A diagnosis and a repair decision are different questions. Once you have a real repair quote, compare the total repair cost with the all-in price of a comparable replacement. Warranty or protection-plan coverage, appliance age, reliability history, efficiency, and likely future repairs can all matter. Appliance Verdict’s interactive result includes a transparent cost comparison rather than a black-box replacement recommendation.
Manufacturer sources
Dataset reviewed through 2026-09-11. Appliance Verdict is independent and is not endorsed by the manufacturers cited. Always follow the exact owner or service documentation for your model.
Browse reviewed washer error codes →
Browse all Electrolux troubleshooting guides →